Touring Ron Mueck’s ‘In bed’ is a monumental affair
Tuesday 14 February 2012 Share FacebookDelicious Email

Crate in the GOMA conservation laboratory being prepared for tour. Photograph: Stuart Fuller | Ron Mueck | In bed 2005 | Mixed media | 161.9 x 649.9 x 395cm | Purchased 2008. Queensland Art Gallery Foundation | Collection: Queensland Art Gallery | © The artist

The conservator’s public image is most likely of someone cleaning an old painting with a cotton wool swab, in a studio with classical music playing. However, art conservation — particularly contemporary art conservation — calls for an innovative and creative approach to the unique challenges presented by contemporary display preparation.

Preparing fragile and complex art works for travel is a collaborative approach between the Gallery’s conservators, workshop staff and installation teams. The regional tour of In Bed by Ron Mueck is a monumental undertaking due to the artwork’s size and the logistical requirements for travelling a sculpture of this nature long distances to small venues. These specialised requirements make this tour one of the Gallery’s most significant investments to-date in a regional Queensland touring program. In preparing for the Gallery’s regional tour conservators have provided recommendations on the design of the crate fit-out and install and will also work through a finely tuned installation sequence at each venue.

TRAVELLING CRATES: THE FIRST MILESTONE

In bed comprises a number of different components — the head and shoulders, the duvet and duvet cover, the body and the pillows and pillow cases — all of which are packed into four very large and heavy crates that can only be lifted with a forklift or moved with a pallet jack.

The crates needed to be fully collapsible to allow them to fit into the venues and to be stored away during the exhibition. A heavy-duty, facing foil lining was applied to the interior of the crate to act as a barrier against vapours, moisture, wind, heat and dust. The lining comprises eight layers of aluminium foil plastic, paper, glass fibre and a fire-retardant adhesive. This lining also allows the crate to be cleaned with alcohol wipes and provides a tear-resistant surface.

The crates’ exteriors were painted so they are easier to see, to keep clean and to protect the wood and repel moisture. Seals were applied to the edges of the panels to keep out moisture and air. Specialised heavy-duty, clear, plastic, rain jackets were also made for the crates because, at some venues, they will have to be unloaded outdoors before they can be moved into loading docks. Heavy-duty castors were also put on the bottom of all of the crates so they can be easily moved without dollies or pallet jacks.

Crate after preparation for the tour. Photograph: Mark Sherwood

REPAIRS TO THE DUVET COVER

Before the duvet cover could go on tour, it needed a little attention. Some of the seams in the cover had split because of the pressure the duvet exerts on the cover while the work is installed and on display. The seam was repaired by the Gallery’s textile conservator. Repairs were done both by hand and using a machine. Because of the size of the work, assistance was required in operating the foot pedal.

Repairing the cover with a sewing machine in the GOMA Conservation Laboratory. Photograph: Danielle Hastie

Repairing the cover using hand stitching. Photograph: Danielle Hastie

ROCKING AND ROLLING THE REGIONS: CREATING AN INSTALLATION DEVICE FOR THE DUVET AND COVER 

A specialised roller system was adapted from a standard pool cover roller to allow the giant duvet to be laid over the sculpture’s body. The roller was required at smaller regional venues where space and staff are limited, thus a system was designed that only relied on a few people to safely install the duvet. The pool roller however needed modifications to allow the duvet to be safely rolled on and off. New adjustable steel legs were built at each end so that the duvet could clear the height of the sculpture’s knees. For stability, the roller is initially set at quite a low height and as the duvet is rolled out the legs are raised so that the duvet can be lifted over the sculpture. Three main alterations were made to the roll. The first involved covering it with an archival non-woven polyethylene fabric to act as a barrier between the metal roll and the artwork. The second involved pads being attached before the hand-wheel at each end of the roll. The third and most important alteration was the addition of padded clamps attached at regular intervals along the length of the roll to help secure the art work. Once the duvet is rolled up, it is wrapped in a calico cover to protect it. The mechanism is then tipped onto its side so the roll can be easily detached from the stands and placed in its travelling crate.

The adapted pool roller. Photograph: Stuart Fuller

The duvet secured to the roll with the black padded clamps. Photograph: Stuart Fuller

EVERY CRATE HAS A SILVER LINING: PACKING THE DUVET AND COVER

Since small creases can betray the scale of In bed, the duvet and cover travel separately and the cover needs ironing before each installation. It is not always possible to iron the cover on tour, so a steamer was tested and proved successful. This now meant that the duvet could be packed with the cover on it, rolled onto the covered metal tube for travel, and steamed before installation at each venue. To enable the crate to be stored as a flat pack and make it easy to remove the duvet and cover, the crate panels had to be detachable. A support structure for the roll is located at each end of the crate and includes the special silver lining. The installation roller was also useful for supporting the duvet while it was packed in its crate for transport. The rods at the end of the roll which fit into the stands can also be used to suspend the rod in the crate. 

The empty crate with the rolled duvet and cover next to it. Photograph: Mark Sherwood

In bed is currently on display at KickArts Contemporary Arts in Cairns until 25 March before heading off to Mackay. Over 20 000 visitors have already seen the artwork and we are only half way through the tour!

Installing the duvet at GOMA. Photograph: Natasha Harth

Ron Mueck | In bed 2005 | Mixed media | 161.9 x 649.9 x 395cm | Purchased 2008. Queensland Art Gallery Foundation | Collection: Queensland Art Gallery | © The artist

Submit your comment

Please enter your name

Your name is required

Please enter a valid email address

An email address is required

Please enter your message